1、不同油煙機的安裝位置

1. Installation positions of different range hoods

　　油煙機按照安裝位置可分為頂吸式、側吸式、下吸式三類，分別位于灶臺的上方，側方和下方。安裝于下方的下吸式油煙機由于比較少見，且安裝比較簡單，我們這里就不多講。而主要講頂吸式和側吸式兩種油煙機相對于灶臺的位置。

The range hood can be divided into three types according to its installation position: top suction, side suction, and bottom suction, located above, on the side, and below the stove. The lower suction range hood installed below is relatively rare and easy to install, so we won't go into detail here. And mainly talk about the position of the top suction and side suction range hoods relative to the stove.

　　頂吸式油煙機考慮到操作方便性與吸煙效果，其距離灶臺的高度一般在65-75cm間;而側吸式油煙機底部距離灶臺距離可以更近，一般在35-45cm間。

Considering the convenience of operation and smoking effect, the height of the top suction range hood from the stove is generally between 65-75cm; The distance between the bottom of the side suction range hood and the stove can be closer, usually between 35-45cm.

　　頂吸式和側吸式油煙機都應水平安裝于灶具正上方，油煙機的垂直中軸線應該與灶具中心線重疊。

Both top suction and side suction range hoods should be installed horizontally above the stove, and the vertical axis of the range hood should overlap with the centerline of the stove.

　　2、不要安在空氣對流強的地方

2. Do not place in areas with strong air convection

　　在預留油煙機安裝位置時，需要考慮到油煙機不能安裝在挨近門窗等空氣對流強的位置，以免影響吸煙效果。因?yàn)槿绻諝鈱α鬟^大，油煙在上升至25cm的有效吸力范圍前就已經擴散不少了。

When reserving the installation position of the range hood, it is necessary to consider that the range hood cannot be installed in a location with strong air convection, such as close to doors and windows, to avoid affecting the smoking effect. Because if the air convection is too strong, the oil fume has already diffused a lot before reaching the effective suction range of 25cm.

　　3、對安裝墻面的要求

3. Requirements for wall installation

　　勿將吸油煙機安裝在木質等易燃物的墻面上;另外，煙機須直接固定于墻面。且墻面一定要是承重墻墻面，絕不能固定在櫥柜上。

Do not install the range hood on walls made of wood or other flammable materials; In addition, the range hood must be directly fixed to the wall. And the wall must be a load-bearing wall and cannot be fixed on the cabinet.

　　4、與櫥柜安裝的先后順序

4. The order of installation of cabinets

　　一般來說，在進行櫥柜設計之前，需要將油煙機的款式尺寸給到櫥柜廠商，預留出油煙機的位置。而油煙機與櫥柜安裝的順序主要根據不同人家的具體情況而定。一般，如果油煙機與櫥柜之間比較緊密，先安裝櫥柜會比較好，否則容易碰壞油煙機。不過非常好是將兩者安排在同一天安裝，協調安裝，效果更好。

Generally speaking, before designing a cabinet, it is necessary to provide the style and size of the range hood to the cabinet manufacturer and reserve the space for the range hood. The installation sequence of range hoods and cabinets mainly depends on the specific situation of different households. Generally, if the range hood is tightly connected to the cabinet, it is better to install the cabinet first, otherwise it is easy to damage the range hood. However, it is best to schedule the installation of both on the same day and coordinate the installation for better results.

以上是關于 濟南排煙罩 的介紹，若想了解相關知識可請點擊：http://www.zypolishing.com 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to Jinan smoke exhaust hoods. If you want to learn more about related knowledge, please click: http://www.zypolishing.com We will wholeheartedly provide you with full score service. Welcome to call us!

上一篇：山東通風管道加工：消聲器分類有哪些？
下一篇：山東通風管道對于我們生活重要性